| Operations
and Maintenance Manual
Complete
Spec Sheet
Power
Pack Manual
Working
With Existing Ducts Is The Key
See
Our YouTube Video
|
- Hydraulically
powers GMP 1/2” Duct Rodders in to and out of
conduits.
- Pushes
and pulls with forces up to 300 lbs.
- Rod speeds
up to 130’/min (40 meters/min)
- Accurately
measures footage and speed with an electronic monitoring
system that works in either direction. The readout
can be scaled to feet or meters.
- When
pulling back, the fiberglass rod is placed directly
back onto the cassette.
- Features
rod access areas for wiping the rod clean during the
pull back operation. Also comes with a package
of rod wiper pads (GMP #32290)
- Duct
Clamp on the machine, and the specially designed Duct
Mounting
Clamp Assembly (GMP #32221) provided on the rodder
cassette, help stabilize both pieces of equipment
during use.
- Comes
with a gasoline driven power pack and hoses.
- Pusher
is mounted on a lightweight, brightly painted, tubular-steel
frame that can be tilted at a 30-degree angle to the
manhole to reduce initial bending of the fiberglass
rod.
- Must
order 1/2” Duct Rodder Separately. Also, user
must provide length of 1-1/4” innerduct between
Rod Pusher and Rodder Cassette, and another length
of 1-1/4” innerduct between the pusher and the
duct to be rodded.
Powered
Duct Rod Pusher
P/N 89004 (calibration in feet)
P/N 89005 (calibration
in meters)
Weight: Duct Rod Pusher 210 lbs. (95 kgs.)
Power
Pack 154 lbs. (70 kgs.)
P/N
89383 Duct to Duct Adapter
This easy to use accessory is used when rodding an occupied
duct but also can be used on an empty one. The adapter
securely and safely positions your rodder in line with
the existing innerduct without disturbing the existing
cable. Quickly sets up with an adjustable wrench.
For use with any combination of 1", 1 1/4" and
1 1/2" innerduct.  |
